Switching Power Supply (DR30W)

Product Description

Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class π
LED indicator for power on
100% full load burn-in test
3 years warranty
Dimensions: 78*93*56mm (W*H*D)

SPECIFICATIONS

INPUT
Voltage Range 85— 264 VAC47— 63 Hz, selected by switch 120— 370VDC
AC Current 0.88 A/115 V 0.48A/ 230 V
Efficiency 74%(DR-30-5), 81%(DR-30-12), 82%(DR-30-15), 83%(DR-30-24)
Inrush Current Cold start 15A/115V 30A/230V

PROTECTION
Over Load 105%— 160%
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage 115%— 135%
Protection type: Shut down o/p voltage, re-power on to recover

ENVIRONMENT
Working Temp., Humidity -10º — +60º C, 20%— 90 %RH
Storage Temp., Humidity -20º C— +85º C, 10%— 95 %RH
Vibration 10-500Hz, 2G 10min. /1cycle, period for 60min, each along X, Y, Z axes

SAFETY
Withstand Voltage I/P-O/P: 3KVAC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC

NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

OUTPUT

Model DR-30-5 DR-30-12 DR-30-15 DR-30-24
DC Voltage 5V 12V 15V 24V
Voltage Tolerance ± 2% ± 1% ± 1% ± 1%
Rated Current 3A 2A 2A 1.5A
Current Range 0-3A 0-2A 0-2A 0-1.5A
Rated Power 15W 24W 30W 36W
Ripple & Noise 80mVp-p 120mVp-p 120mVp-p 150mVp-p
DC Adjustment Range -5%, +10% ± 10% ± 10% ± 10%
Setup, Rise, Hold Time 100ms, 30ms/230VAC100ms, 30ms/115VAC at full load

More Product Features